Source map
Securement
WLL, chain and strap tables, equipment setups, reinspection, and removal criteria.
- Claim count
- 252
- Status mix
- Verified 173 Partially verified 56 Verify live 3 Not practically verifiable 20
- Last checked
- 2026-06-08
- Data file
- /data/claims.json
Primary Source Targets
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securementecfr_49_392_9- 49 CFR 392.9 - Inspection of cargo, cargo securement devices and systemsecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargowa_sharp_lever_vs_ratchet- Lever vs. Ratchetwstda_t1_2005_ibr- WSTDA T-1: Recommended Standard Specification for Synthetic Web Tie Downs
High-Risk Follow-Up
- SEC-4BDDD9B7C4: 1: Unmarked or illegible tiedowns have a working load limit of zero and cannot be counted toward securement (NSC Standard 10).
- SEC-EE3FF7607B: Lumber Bundles / Scenarios / Description - Description: Bundled dressed lumber or similar bundled building products example.
- SEC-A699F0213C: Logs / Forestry / Scenarios / Description - Description: Lengthwise shortwood/longwood stack example. Log vehicles must use bunks, bolsters, stakes, or other cradling means.
- SEC-88AC82271E: Checklist - 0: All tiedowns still tight and secure
- SEC-9CD18D562F: Checklist - 1: No cargo has shifted, tipped, or fallen
- SEC-F7901CEC1F: Checklist - 2: Tiedowns not damaged, cut, or abraded
- SEC-8815E46A6E: Checklist - 3: Edge protection still in place where used
- SEC-CD8C7ADE5E: Checklist - 4: No new load movement or vibration loosening
- SEC-DB68B6D306: Province Notes / NS - NS: NS tarping requirements also apply at re-inspection — check covers for displacement.
- SEC-C471E1E96B: Province Notes / ON - ON: MTO has cited drivers for lack of documented re-inspection evidence.
- SEC-22250F5F64: Province Notes / QC - QC: Contrôle routier Québec actively checks re-inspection compliance at roadside stops.
- SEC-D1190D2D56: Chain / Categories / Criteria - 0: Visibly stretched links
Claims
252 of 252 claims shown
SEC-BBD49C47CEVerified Proof Coil / Grades / Grade - Grade: 30
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/grade- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-B8D5280B27Verified Proof Coil / Grades / Markings - 0: 3
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/markings/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-E9E7F8158CVerified Proof Coil / Grades / Markings - 1: 30
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/markings/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-99F0698228Verified Proof Coil / Grades / Markings - 2: 300
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/markings/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F0FFCD461EVerified Proof Coil / Grades / Name - Name: Proof Coil
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/name- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-FBDB4DC84APartially verified Proof Coil / Grades / Recommended - Recommended: no
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/recommended- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-A62E49BD35Verified Proof Coil / 5/16 in / Grades / Sizes / Size In - Size In: 5/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/0/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-6624E4DB2EVerified Proof Coil / 5/16 in / Grades / Sizes / Size Mm - Size Mm: 8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/0/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-7F6B54A6A6Verified Proof Coil / 5/16 in / Grades / Sizes / Wll Kg - Wll Kg: 860
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/0/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-673AA09AE3Verified Proof Coil / 5/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 1900
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/0/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-3D198274E5Verified Proof Coil / 3/8 in / Grades / Sizes / Size In - Size In: 3/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/1/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-A77E59C15DVerified Proof Coil / 3/8 in / Grades / Sizes / Size Mm - Size Mm: 10
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/1/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-6DC9768D29Verified Proof Coil / 3/8 in / Grades / Sizes / Wll Kg - Wll Kg: 1200
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/1/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-EA801FA190Verified Proof Coil / 3/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 2650
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/1/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-B2D2CAE911Verified Proof Coil / 7/16 in / Grades / Sizes / Size In - Size In: 7/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/2/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-58641E57EDVerified Proof Coil / 7/16 in / Grades / Sizes / Size Mm - Size Mm: 11
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/2/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F555AD03D8Verified Proof Coil / 7/16 in / Grades / Sizes / Wll Kg - Wll Kg: 1680
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/2/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-C652FD7F51Verified Proof Coil / 7/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 3700
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/2/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-034C4940B5Verified Proof Coil / 1/2 in / Grades / Sizes / Size In - Size In: 1/2
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/3/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-BB65875E26Verified Proof Coil / 1/2 in / Grades / Sizes / Size Mm - Size Mm: 13
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/3/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F069C1F792Verified Proof Coil / 1/2 in / Grades / Sizes / Wll Kg - Wll Kg: 2030
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/3/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-ECEB7AF829Verified Proof Coil / 1/2 in / Grades / Sizes / Wll Lbs - Wll Lbs: 4500
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/3/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-26097EAE68Verified Proof Coil / 5/8 in / Grades / Sizes / Size In - Size In: 5/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/4/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-FC2FC881D2Verified Proof Coil / 5/8 in / Grades / Sizes / Size Mm - Size Mm: 16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/4/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-6377EB824DVerified Proof Coil / 5/8 in / Grades / Sizes / Wll Kg - Wll Kg: 3130
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/4/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-EFEB98D5A2Verified Proof Coil / 5/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 6900
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/sizes/4/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F5638BCF70Partially verified Proof Coil / Grades / Typical Use - Typical Use: General purpose; lowest WLL
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/0/typicalUse- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-CC6D1999A6Verified High Test / Grades / Grade - Grade: 43
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/grade- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F4C31670C1Verified High Test / Grades / Markings - 0: 4
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/markings/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-34CF488DB0Verified High Test / Grades / Markings - 1: 43
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/markings/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-995CC4DDA1Verified High Test / Grades / Markings - 2: 430
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/markings/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-192B28BE46Verified High Test / Grades / Name - Name: High Test
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/name- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-00FAA001BEPartially verified High Test / Grades / Recommended - Recommended: no
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/recommended- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-2BB1492634Verified High Test / 5/16 in / Grades / Sizes / Size In - Size In: 5/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/0/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F9FE80D921Verified High Test / 5/16 in / Grades / Sizes / Size Mm - Size Mm: 8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/0/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-17F3EC449BVerified High Test / 5/16 in / Grades / Sizes / Wll Kg - Wll Kg: 1770
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/0/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-768FC97B4AVerified High Test / 5/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 3900
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/0/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8502B005DAVerified High Test / 3/8 in / Grades / Sizes / Size In - Size In: 3/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/1/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-907A38C135Verified High Test / 3/8 in / Grades / Sizes / Size Mm - Size Mm: 10
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/1/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-AA873B6D01Verified High Test / 3/8 in / Grades / Sizes / Wll Kg - Wll Kg: 2450
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/1/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-EEDD1BFCC5Verified High Test / 3/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 5400
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/1/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-075C4D0411Verified High Test / 7/16 in / Grades / Sizes / Size In - Size In: 7/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/2/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-83951BA4DCVerified High Test / 7/16 in / Grades / Sizes / Size Mm - Size Mm: 11
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/2/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-A728B5270EVerified High Test / 7/16 in / Grades / Sizes / Wll Kg - Wll Kg: 3270
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/2/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-579C8204FAVerified High Test / 7/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 7200
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/2/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-59FBD5190DVerified High Test / 1/2 in / Grades / Sizes / Size In - Size In: 1/2
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/3/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-2DD1F1CECCVerified High Test / 1/2 in / Grades / Sizes / Size Mm - Size Mm: 13
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/3/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-117FD70D95Verified High Test / 1/2 in / Grades / Sizes / Wll Kg - Wll Kg: 4170
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/3/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F806DBB730Verified High Test / 1/2 in / Grades / Sizes / Wll Lbs - Wll Lbs: 9200
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/3/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-9FC1C0D137Verified High Test / 5/8 in / Grades / Sizes / Size In - Size In: 5/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/4/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-12F4BC504DVerified High Test / 5/8 in / Grades / Sizes / Size Mm - Size Mm: 16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/4/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-CC6A832945Verified High Test / 5/8 in / Grades / Sizes / Wll Kg - Wll Kg: 5910
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/4/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-3388E04F28Verified High Test / 5/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 13000
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/sizes/4/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-4641E458E1Partially verified High Test / Grades / Typical Use - Typical Use: Towing, binding
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/1/typicalUse- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-0BD1217B5EVerified Transport / Grades / Grade - Grade: 70
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/grade- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-C9BE3FEA3BVerified Transport / Grades / Markings - 0: 7
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/markings/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-94A62531CFVerified Transport / Grades / Markings - 1: 70
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/markings/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-9E97E88AD4Verified Transport / Grades / Markings - 2: 700
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/markings/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-00159F5BF8Verified Transport / Grades / Name - Name: Transport
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/name- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8008017CC8Partially verified Transport / Grades / Recommended - Recommended: yes
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/recommended- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-473D4D855AVerified Transport / 5/16 in / Grades / Sizes / Size In - Size In: 5/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/0/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-4492CCC746Verified Transport / 5/16 in / Grades / Sizes / Size Mm - Size Mm: 8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/0/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-17CC7537F3Verified Transport / 5/16 in / Grades / Sizes / Wll Kg - Wll Kg: 2130
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/0/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-CED017F27BVerified Transport / 5/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 4700
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/0/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-027181788DVerified Transport / 3/8 in / Grades / Sizes / Size In - Size In: 3/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/1/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8527ACAF50Verified Transport / 3/8 in / Grades / Sizes / Size Mm - Size Mm: 10
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/1/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-3B2578521DVerified Transport / 3/8 in / Grades / Sizes / Wll Kg - Wll Kg: 2990
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/1/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8815777865Verified Transport / 3/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 6600
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/1/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-A0E2E826AEVerified Transport / 7/16 in / Grades / Sizes / Size In - Size In: 7/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/2/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-B2636911F0Verified Transport / 7/16 in / Grades / Sizes / Size Mm - Size Mm: 11
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/2/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-3E71A1E696Verified Transport / 7/16 in / Grades / Sizes / Wll Kg - Wll Kg: 3970
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/2/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-FF2C6478A8Verified Transport / 7/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 8750
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/2/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-84F5EAF958Verified Transport / 1/2 in / Grades / Sizes / Size In - Size In: 1/2
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/3/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-190EA92667Verified Transport / 1/2 in / Grades / Sizes / Size Mm - Size Mm: 13
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/3/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-DCE2655347Verified Transport / 1/2 in / Grades / Sizes / Wll Kg - Wll Kg: 5130
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/3/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-2132B65395Verified Transport / 1/2 in / Grades / Sizes / Wll Lbs - Wll Lbs: 11300
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/3/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-42BFEA5BC5Verified Transport / 5/8 in / Grades / Sizes / Size In - Size In: 5/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/4/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-3C844D2AE4Verified Transport / 5/8 in / Grades / Sizes / Size Mm - Size Mm: 16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/4/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-09DF75F5F9Verified Transport / 5/8 in / Grades / Sizes / Wll Kg - Wll Kg: 7170
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/4/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-68B0D530A1Verified Transport / 5/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 15800
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/sizes/4/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-BD5E52AB8DPartially verified Transport / Grades / Typical Use - Typical Use: Industry standard for cargo securement
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/2/typicalUse- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-6F337B8D4DVerified Alloy / Grades / Grade - Grade: 80
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/grade- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-2F2B044A0FVerified Alloy / Grades / Markings - 0: 8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/markings/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-DB8FCD1DD9Verified Alloy / Grades / Markings - 1: 80
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/markings/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-3FDA1271C3Verified Alloy / Grades / Markings - 2: 800
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/markings/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-0D68047154Verified Alloy / Grades / Name - Name: Alloy
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/name- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-18072547B6Partially verified Alloy / Grades / Recommended - Recommended: no
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/recommended- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-F35F115AFAVerified Alloy / 5/16 in / Grades / Sizes / Size In - Size In: 5/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/0/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-A044CCC5C0Verified Alloy / 5/16 in / Grades / Sizes / Size Mm - Size Mm: 8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/0/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-FE3350235FVerified Alloy / 5/16 in / Grades / Sizes / Wll Kg - Wll Kg: 2000
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/0/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-A29EA3A0AAVerified Alloy / 5/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 4500
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/0/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-ADE1600125Verified Alloy / 3/8 in / Grades / Sizes / Size In - Size In: 3/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/1/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-68344B61A8Verified Alloy / 3/8 in / Grades / Sizes / Size Mm - Size Mm: 10
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/1/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-9AD28115BBVerified Alloy / 3/8 in / Grades / Sizes / Wll Kg - Wll Kg: 3200
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/1/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-63E276CAAAVerified Alloy / 3/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 7100
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/1/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-53948925F3Verified Alloy / 1/2 in / Grades / Sizes / Size In - Size In: 1/2
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/2/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-620FDF6A4FVerified Alloy / 1/2 in / Grades / Sizes / Size Mm - Size Mm: 13
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/2/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-CD46482ED3Verified Alloy / 1/2 in / Grades / Sizes / Wll Kg - Wll Kg: 5400
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/2/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-6F9354CD6FVerified Alloy / 1/2 in / Grades / Sizes / Wll Lbs - Wll Lbs: 12000
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/2/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-4E755A33D3Verified Alloy / 5/8 in / Grades / Sizes / Size In - Size In: 5/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/3/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-D44B583CD1Verified Alloy / 5/8 in / Grades / Sizes / Size Mm - Size Mm: 16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/3/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-5A2E659676Verified Alloy / 5/8 in / Grades / Sizes / Wll Kg - Wll Kg: 8200
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/3/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-82916D081FVerified Alloy / 5/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 18100
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/sizes/3/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-A1963F3AC8Partially verified Alloy / Grades / Typical Use - Typical Use: Cargo securement + overhead lifting
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/3/typicalUse- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-4B1FEA814BVerified Alloy / Grades / Grade - Grade: 100
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/grade- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-4CE932A5A1Verified Alloy / Grades / Markings - 0: 10
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/markings/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-E06ED6B639Verified Alloy / Grades / Markings - 1: 100
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/markings/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-B3509FDD25Verified Alloy / Grades / Markings - 2: 1000
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/markings/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F03AFDF45CVerified Alloy / Grades / Name - Name: Alloy
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/name- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8A2195C7FAPartially verified Alloy / Grades / Recommended - Recommended: no
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/recommended- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-330DD73AC1Verified Alloy / 5/16 in / Grades / Sizes / Size In - Size In: 5/16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/0/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-B008A350BDVerified Alloy / 5/16 in / Grades / Sizes / Size Mm - Size Mm: 8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/0/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-4A4FEBA62DVerified Alloy / 5/16 in / Grades / Sizes / Wll Kg - Wll Kg: 2600
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/0/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-F4EA03B2FDVerified Alloy / 5/16 in / Grades / Sizes / Wll Lbs - Wll Lbs: 5700
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/0/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-BEE7E41B51Verified Alloy / 3/8 in / Grades / Sizes / Size In - Size In: 3/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/1/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-00608F00EAVerified Alloy / 3/8 in / Grades / Sizes / Size Mm - Size Mm: 10
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/1/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-9E97A56CA9Verified Alloy / 3/8 in / Grades / Sizes / Wll Kg - Wll Kg: 4000
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/1/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-45AB231D05Verified Alloy / 3/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 8800
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/1/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-90F1CF9414Verified Alloy / 1/2 in / Grades / Sizes / Size In - Size In: 1/2
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/2/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-1BBA11F82CVerified Alloy / 1/2 in / Grades / Sizes / Size Mm - Size Mm: 13
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/2/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-265FAF6921Verified Alloy / 1/2 in / Grades / Sizes / Wll Kg - Wll Kg: 6800
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/2/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8483C65212Verified Alloy / 1/2 in / Grades / Sizes / Wll Lbs - Wll Lbs: 15000
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/2/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-2EDD5896F1Verified Alloy / 5/8 in / Grades / Sizes / Size In - Size In: 5/8
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/3/size_in- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-FE15C7F7ECVerified Alloy / 5/8 in / Grades / Sizes / Size Mm - Size Mm: 16
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/3/size_mm- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-8AF7892D6CVerified Alloy / 5/8 in / Grades / Sizes / Wll Kg - Wll Kg: 10300
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/3/wll_kg- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-C3C9F28B1DVerified Alloy / 5/8 in / Grades / Sizes / Wll Lbs - Wll Lbs: 22600
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/sizes/3/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this chain-table claim against NSC 10.
SEC-6D3C41EEF2Partially verified Alloy / Grades / Typical Use - Typical Use: High-strength applications
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 4, Section 7, Welded Steel Chain - Working Load Limits table, PDF page 47.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/grades/4/typicalUse- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as operational guidance: NSC 10 verifies the chain grade/table row, but not this app-specific recommendation or usage label.
SEC-8192B20FAEVerified 0: Use the chain grade and WLL marking on the chain or manufacturer documentation; do not assign Grade 30 by default to unmarked or illegible chain.
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, sections 11-12 and Part 3, PDF pages 14-15 and 45.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this unmarked-chain caution against current NSC 10.
SEC-4BDDD9B7C4Partially verified 1: Unmarked or illegible tiedowns have a working load limit of zero and cannot be counted toward securement (NSC Standard 10).
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, sections 11 and 21, PDF pages 14 and 16.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/notes/1- Risk
- High risk, Medium confidence
- Follow-up
- Verify binder-specific WLL wording against the official binder/manufacturer standard or replace with a general weakest-component WLL caveat.
SEC-AE3F406EC8Verified 2: The weakest component in any tiedown assembly determines the assembly's WLL.
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 21(1), PDF page 16.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/notes/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this weakest-component WLL claim against NSC 10.
SEC-C2E4E3422DVerified 3: Binder, connector, anchor point, and attachment WLL must be considered; the tiedown assembly is limited by the lowest WLL component.
- Surface
- REF > Securement > Chain Grades
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 21(1), PDF page 16.
- App data
apps/transport-ref/src/data/securement/chain-grades.json/notes/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this tiedown-assembly WLL limitation claim against NSC 10.
SEC-7AC82CEE50Partially verified Excavator on Step-Deck / Scenarios / Defaults / Blocked Forward - Blocked Forward: no
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/blockedForward- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as app navigation/example metadata unless an operational source is added.
SEC-D098704A67Not practically verifiable Excavator on Step-Deck / Scenarios / Defaults / Length Ft - Length Ft: 25
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/length_ft- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-0B2ABFC605Not practically verifiable Excavator on Step-Deck / Scenarios / Defaults / Length M - Length M: 7.62
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/length_m- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-F95FB4A59EVerified Excavator on Step-Deck / Scenarios / Defaults / Min Tiedowns - Min Tiedowns: 4
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, sections 87 and 89, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/minTiedowns- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this minimum-tiedown example within the scenario assumptions.
SEC-E3B6AFB690Not practically verifiable Excavator on Step-Deck / Scenarios / Defaults / Weight Kg - Weight Kg: 22680
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/weight_kg- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-39F8EB0F6DNot practically verifiable Excavator on Step-Deck / Scenarios / Defaults / Weight Lbs - Weight Lbs: 50000
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/weight_lbs- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-646CD31E80Verified Excavator on Step-Deck / Scenarios / Defaults / Wll Rule - Wll Rule: 0.5
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 10(2)-(3), PDF pages 14-15.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/defaults/wllRule- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this WLL rule, within the scenario limits described in the app text.
SEC-31A4E46032Verified Excavator on Step-Deck / Scenarios / Description - Description: Heavy equipment (>4,500 kg / 10,000 lb) example. Accessory equipment lowered and secured; articulated equipment restrained against articulation.
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, sections 87 and 89, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/description- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-8D0A8B96ADVerified Excavator on Step-Deck / Scenarios - 0: Minimum 4 tiedowns per NSC 10 Part 2, Division 7 for heavy vehicles with crawler tracks or wheels
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, sections 87 and 89, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-F716471318Verified Excavator on Step-Deck / Scenarios - 1: Each heavy-vehicle tiedown must have WLL of at least 2,268 kg and attach as close as practical at the front and rear or to mounting points specifically designed for that purpose
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, sections 87 and 89, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-20F16A663EVerified Excavator on Step-Deck / Scenarios - 2: Accessory equipment, including a hydraulic shovel, must be completely lowered and secured unless NSC 10 exceptions apply
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, sections 87 and 89, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/notes/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-BC8EC3AA9FVerified Excavator on Step-Deck / Scenarios - 3: Articulated vehicles must have articulation locked out
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, sections 87 and 89, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/0/notes/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-5496D318D7Partially verified Steel Coils / Scenarios / Defaults / Blocked Forward - Blocked Forward: yes
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/blockedForward- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as app navigation/example metadata unless an operational source is added.
SEC-CADA4BAE09Not practically verifiable Steel Coils / Scenarios / Defaults / Length Ft - Length Ft: 8
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/length_ft- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-A16722A2A3Not practically verifiable Steel Coils / Scenarios / Defaults / Length M - Length M: 2.44
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/length_m- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-3452AE1A5FPartially verified Steel Coils / Scenarios / Defaults / Min Tiedowns - Min Tiedowns: 2
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 49-58, PDF pages 25-28; metal-coil tiedown count depends on eye orientation, grouping, immobilization, and the applicable section.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/minTiedowns- Risk
- Medium risk, Medium confidence
- Follow-up
- Do not treat this steel-coil default count as legal guidance; derive tiedown count from the specific eye orientation and NSC 10 sections 49-58.
SEC-D65A338FF5Not practically verifiable Steel Coils / Scenarios / Defaults / Weight Kg - Weight Kg: 18144
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/weight_kg- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-9D5E4CF9B3Not practically verifiable Steel Coils / Scenarios / Defaults / Weight Lbs - Weight Lbs: 40000
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/weight_lbs- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-C9C1CE8218Verified Steel Coils / Scenarios / Defaults / Wll Rule - Wll Rule: 0.5
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 10(2)-(3), PDF pages 14-15.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/defaults/wllRule- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this WLL rule, within the scenario limits described in the app text.
SEC-31EA2557FDVerified Steel Coils / Scenarios / Description - Description: Metal coils totaling ≥2,268 kg / 5,000 lb use eye-orientation-specific securement. Rolling prevention is required.
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 48-58, PDF pages 25-28.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/description- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-1FF9ED7817Verified Steel Coils / Scenarios - 0: Eyes vertical: diagonal cross-tiedowns + transverse tiedown
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 48-58, PDF pages 25-28.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-74887DCA32Verified Steel Coils / Scenarios - 1: Eyes crosswise: through-eye tiedowns restricting forward/rearward motion; diagonal X-pattern through the eye is prohibited
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 48-58, PDF pages 25-28.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-08828932A4Verified Steel Coils / Scenarios - 2: Eyes lengthwise: diagonal tiedowns through the eye from opposite corners
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 48-58, PDF pages 25-28.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/notes/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-935EC508FCVerified Steel Coils / Scenarios - 3: Rolling prevention through timbers, chocks, wedges, or cradles is mandatory
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 48-58, PDF pages 25-28.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/notes/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-2E6E6AC7A3Verified Steel Coils / Scenarios - 4: Nailed blocking alone is prohibited for horizontal coils
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 3, sections 48-58, PDF pages 25-28.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/1/notes/4- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-B4D92D8C22Partially verified Lumber Bundles / Scenarios / Defaults / Blocked Forward - Blocked Forward: yes
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/blockedForward- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as app navigation/example metadata unless an operational source is added.
SEC-6B5D29F906Not practically verifiable Lumber Bundles / Scenarios / Defaults / Length Ft - Length Ft: 16
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/length_ft- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-DC7D6E4DEENot practically verifiable Lumber Bundles / Scenarios / Defaults / Length M - Length M: 4.88
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/length_m- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-E469409E13Verified Lumber Bundles / Scenarios / Defaults / Min Tiedowns - Min Tiedowns: 2
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 4, section 22(2)-(3), PDF pages 16-17.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/minTiedowns- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this minimum-tiedown example within the scenario assumptions.
SEC-F04489051ANot practically verifiable Lumber Bundles / Scenarios / Defaults / Weight Kg - Weight Kg: 13608
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/weight_kg- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-E8FFB23F2DNot practically verifiable Lumber Bundles / Scenarios / Defaults / Weight Lbs - Weight Lbs: 30000
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/weight_lbs- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-DEFA6F0904Verified Lumber Bundles / Scenarios / Defaults / Wll Rule - Wll Rule: 0.5
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 10(2)-(3), PDF pages 14-15.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/defaults/wllRule- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this WLL rule, within the scenario limits described in the app text.
SEC-EE3FF7607BPartially verified Lumber Bundles / Scenarios / Description - Description: Bundled dressed lumber or similar bundled building products example.
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/description- Risk
- High risk, Medium confidence
- Follow-up
- Confirm this quick-setup claim against the cited commodity-specific NSC 10 division or mark it as an internal example.
SEC-D9812387C1Verified Lumber Bundles / Scenarios - 0: If blocked/braced against forward movement: 1 tiedown per 3.04 m (10 ft) of length
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 2, sections 41-47, PDF pages 22-24; section 22, PDF pages 16-17.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-519BC54C65Verified Lumber Bundles / Scenarios - 1: Without blocking: 2 tiedowns for 5–10 ft, +1 per additional 10 ft
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 2, sections 41-47, PDF pages 22-24; section 22, PDF pages 16-17.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-8EAB0F130EVerified Lumber Bundles / Scenarios - 2: Bundles placed side by side must be in direct contact or prevented from moving toward each other
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 2, sections 41-47, PDF pages 22-24; section 22, PDF pages 16-17.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/notes/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-E29085A01BVerified Lumber Bundles / Scenarios - 3: Upper tiers on spacers must use spacers that support the bottom row, are properly oriented, provide friction, and act as one piece
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 2, sections 41-47, PDF pages 22-24; section 22, PDF pages 16-17.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/2/notes/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-120C743DF9Partially verified Vehicles as Cargo / Scenarios / Defaults / Blocked Forward - Blocked Forward: no
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/blockedForward- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as app navigation/example metadata unless an operational source is added.
SEC-26F8B68698Not practically verifiable Vehicles as Cargo / Scenarios / Defaults / Length Ft - Length Ft: 16
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/length_ft- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-3BAD861A73Not practically verifiable Vehicles as Cargo / Scenarios / Defaults / Length M - Length M: 4.88
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/length_m- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-0358485409Verified Vehicles as Cargo / Scenarios / Defaults / Min Tiedowns - Min Tiedowns: 2
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, section 88, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/minTiedowns- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this minimum-tiedown example within the scenario assumptions.
SEC-E051DFBDAFNot practically verifiable Vehicles as Cargo / Scenarios / Defaults / Weight Kg - Weight Kg: 2268
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/weight_kg- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-1AD0E4256FNot practically verifiable Vehicles as Cargo / Scenarios / Defaults / Weight Lbs - Weight Lbs: 5000
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/weight_lbs- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-12E7D8734EVerified Vehicles as Cargo / Scenarios / Defaults / Wll Rule - Wll Rule: 0.5
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 10(2)-(3), PDF pages 14-15.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/defaults/wllRule- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this WLL rule, within the scenario limits described in the app text.
SEC-E84DD4F681Verified Vehicles as Cargo / Scenarios / Description - Description: Light-vehicle cargo example. Light vehicles require front and rear restraint; heavy vehicles follow the heavy-vehicle rules.
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, section 88, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/description- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-5C824F6039Verified Vehicles as Cargo / Scenarios - 0: Light vehicles (≤4,536 kg / 10,000 lbs): minimum 2 tiedowns restraining front and rear
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, section 88, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-DCD5D45995Verified Vehicles as Cargo / Scenarios - 1: Heavy vehicles (>4,500 kg / 10,000 lb): minimum 4 tiedowns under heavy-vehicle rules
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, section 88, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-3DAA1976E4Verified Vehicles as Cargo / Scenarios - 2: Tiedowns fitting over wheels must provide restraint in all three axes
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 7, section 88, PDF page 40.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/3/notes/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-0B82F4EE59Partially verified Logs / Forestry / Scenarios / Defaults / Blocked Forward - Blocked Forward: no
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/blockedForward- Risk
- Medium risk, Medium confidence
- Follow-up
- Treat this as app navigation/example metadata unless an operational source is added.
SEC-CF9D6A487ANot practically verifiable Logs / Forestry / Scenarios / Defaults / Length Ft - Length Ft: 30
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/length_ft- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-84A6A7EDD1Not practically verifiable Logs / Forestry / Scenarios / Defaults / Length M - Length M: 9.14
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/length_m- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-8DA27FB0B5Verified Logs / Forestry / Scenarios / Defaults / Min Tiedowns - Min Tiedowns: 2
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 1, sections 29-39, PDF pages 19-21.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/minTiedowns- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this minimum-tiedown example within the scenario assumptions.
SEC-9A46B7037DNot practically verifiable Logs / Forestry / Scenarios / Defaults / Weight Kg - Weight Kg: 27216
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/weight_kg- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-7C7FC34DC2Not practically verifiable Logs / Forestry / Scenarios / Defaults / Weight Lbs - Weight Lbs: 60000
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Example calculator default; no official source verifies this scenario-specific example size or weight.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/weight_lbs- Risk
- Medium risk, Low confidence
- Follow-up
- Keep these as clearly labelled non-authoritative demo values, or replace them with user-entered load values in the app workflow.
SEC-8563ABE009Verified Logs / Forestry / Scenarios / Defaults / Wll Rule - Wll Rule: 0.1667
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 1, sections 29-39, PDF pages 19-21.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/defaults/wllRule- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this WLL rule, within the scenario limits described in the app text.
SEC-A699F0213CPartially verified Logs / Forestry / Scenarios / Description - Description: Lengthwise shortwood/longwood stack example. Log vehicles must use bunks, bolsters, stakes, or other cradling means.
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10 commodity-specific divisions; exact division/section pending.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/description- Risk
- High risk, Medium confidence
- Follow-up
- Confirm this quick-setup claim against the cited commodity-specific NSC 10 division or mark it as an internal example.
SEC-8DD0EB960DVerified Logs / Forestry / Scenarios - 0: For shortwood or longwood loaded lengthwise, aggregate WLL for tiedowns used to secure each stack must be at least one-sixth of the stack weight
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 1, sections 29-39, PDF pages 19-21.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-7E3150D453Verified Logs / Forestry / Scenarios - 1: Outer bottom logs must rest solidly against bunks, each touching at least 2 stakes
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 1, sections 29-39, PDF pages 19-21.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-F80436D970Verified Logs / Forestry / Scenarios - 2: Center of highest outside log on each side must be below top of each bunk
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 1, sections 29-39, PDF pages 19-21.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/notes/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-5038F6DD66Verified Logs / Forestry / Scenarios - 3: Shortwood loaded crosswise on vehicles built on or after Jan. 1, 2010 requires a device that maintains at least 900 kg tiedown tension and automatically takes up slack as logs settle
- Surface
- REF > Securement > Quick Setups
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 2, Division 1, sections 29-39, PDF pages 19-21.
- App data
apps/transport-ref/src/data/securement/quick-setups.json/scenarios/4/notes/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this quick-setup rule against the cited NSC 10 provision.
SEC-88AC82271EPartially verified Checklist - 0: All tiedowns still tight and secure
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3, PDF page 12; checklist wording is an operational restatement unless separately mapped.
- App data
apps/transport-ref/src/data/securement/reinspection.json/checklist/0- Risk
- High risk, Medium confidence
- Follow-up
- Map this checklist item to exact NSC 10 securement, condition, or removal-criteria wording before marking it verified.
SEC-9CD18D562FPartially verified Checklist - 1: No cargo has shifted, tipped, or fallen
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3, PDF page 12; checklist wording is an operational restatement unless separately mapped.
- App data
apps/transport-ref/src/data/securement/reinspection.json/checklist/1- Risk
- High risk, Medium confidence
- Follow-up
- Map this checklist item to exact NSC 10 securement, condition, or removal-criteria wording before marking it verified.
SEC-F7901CEC1FPartially verified Checklist - 2: Tiedowns not damaged, cut, or abraded
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3, PDF page 12; checklist wording is an operational restatement unless separately mapped.
- App data
apps/transport-ref/src/data/securement/reinspection.json/checklist/2- Risk
- High risk, Medium confidence
- Follow-up
- Map this checklist item to exact NSC 10 securement, condition, or removal-criteria wording before marking it verified.
SEC-8815E46A6EPartially verified Checklist - 3: Edge protection still in place where used
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3, PDF page 12; checklist wording is an operational restatement unless separately mapped.
- App data
apps/transport-ref/src/data/securement/reinspection.json/checklist/3- Risk
- High risk, Medium confidence
- Follow-up
- Map this checklist item to exact NSC 10 securement, condition, or removal-criteria wording before marking it verified.
SEC-CD8C7ADE5EPartially verified Checklist - 4: No new load movement or vibration loosening
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3, PDF page 12; checklist wording is an operational restatement unless separately mapped.
- App data
apps/transport-ref/src/data/securement/reinspection.json/checklist/4- Risk
- High risk, Medium confidence
- Follow-up
- Map this checklist item to exact NSC 10 securement, condition, or removal-criteria wording before marking it verified.
SEC-AA2B5AA089Verified Checklist - 5: Aggregate WLL still meets 50% cargo weight
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3 and Division 3, section 10(2)-(3), PDF pages 12 and 15.
- App data
apps/transport-ref/src/data/securement/reinspection.json/checklist/5- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the aggregate WLL 50% checklist claim against NSC 10.
SEC-2B687BA76FVerified Intervals / After Loading Km - After Loading Km: 80
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3(2)(b), PDF page 12.
- App data
apps/transport-ref/src/data/securement/reinspection.json/intervals/afterLoading_km- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the 80 km first-reinspection interval against NSC 10.
SEC-7B862B219FPartially verified Intervals / After Loading Mi - After Loading Mi: 50
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ecfr_49_392_9- 49 CFR 392.9 - Inspection of cargo, cargo securement devices and systems- Locator
- NSC Standard 10, Part 1, Division 2, section 3(2) states the governing Canadian threshold of 80 km; 49 CFR 392.9(b)(2) states the US figure "within the first 50 miles". The app's 50 mi is the US-regulation value, not an exact conversion of the NSC 10 80 km threshold (50 mi = 80.5 km).
- App data
apps/transport-ref/src/data/securement/reinspection.json/intervals/afterLoading_mi- Risk
- Medium risk, Medium confidence
- Follow-up
- In Canada the governing thresholds are the NSC 10 kilometre values (80 km / 240 km). Label the mile values as US 49 CFR 392.9 equivalents shown for convenience, not enforceable Canadian thresholds; they are not exact conversions of the km figures.
SEC-0D632ABA08Verified Intervals / Recurring Hours - Recurring Hours: 3
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3(3)(b), PDF page 12.
- App data
apps/transport-ref/src/data/securement/reinspection.json/intervals/recurring_hours- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the 3 hour recurring-reinspection interval against NSC 10.
SEC-A1551C7CEFVerified Intervals / Recurring Km - Recurring Km: 240
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 2, section 3(3)(c), PDF page 12.
- App data
apps/transport-ref/src/data/securement/reinspection.json/intervals/recurring_km- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the 240 km recurring-reinspection interval against NSC 10.
SEC-36F8D2876BPartially verified Intervals / Recurring Mi - Recurring Mi: 150
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- multi
- Source
ecfr_49_392_9- 49 CFR 392.9 - Inspection of cargo, cargo securement devices and systems- Locator
- NSC Standard 10, Part 1, Division 2, section 3(3) states the governing Canadian threshold of 240 km; 49 CFR 392.9(b)(3) states the US figure "150 miles, whichever occurs first". The app's 150 mi is the US-regulation value, not an exact conversion of the NSC 10 240 km threshold (150 mi = 241 km).
- App data
apps/transport-ref/src/data/securement/reinspection.json/intervals/recurring_mi- Risk
- Medium risk, Medium confidence
- Follow-up
- In Canada the governing thresholds are the NSC 10 kilometre values (80 km / 240 km). Label the mile values as US 49 CFR 392.9 equivalents shown for convenience, not enforceable Canadian thresholds; they are not exact conversions of the km figures.
SEC-DB68B6D306Verify live Province Notes / NS - NS: NS tarping requirements also apply at re-inspection — check covers for displacement.
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- NS
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Province enforcement or operational source required; NSC 10 does not verify this province-specific operational note.
- App data
apps/transport-ref/src/data/securement/reinspection.json/provinceNotes/NS- Risk
- High risk, Low confidence
- Follow-up
- Verify this province-specific operational note against the current provincial agency, enforcement guidance, or internal citation record before operational reliance.
SEC-C471E1E96BVerify live Province Notes / ON - ON: MTO has cited drivers for lack of documented re-inspection evidence.
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- ON
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Province enforcement or operational source required; NSC 10 does not verify this province-specific operational note.
- App data
apps/transport-ref/src/data/securement/reinspection.json/provinceNotes/ON- Risk
- High risk, Low confidence
- Follow-up
- Verify this province-specific operational note against the current provincial agency, enforcement guidance, or internal citation record before operational reliance.
SEC-22250F5F64Verify live Province Notes / QC - QC: Contrôle routier Québec actively checks re-inspection compliance at roadside stops.
- Surface
- REF > Securement > Reinspection
- Jurisdiction
- QC
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Province enforcement or operational source required; NSC 10 does not verify this province-specific operational note.
- App data
apps/transport-ref/src/data/securement/reinspection.json/provinceNotes/QC- Risk
- High risk, Low confidence
- Follow-up
- Verify this province-specific operational note against the current provincial agency, enforcement guidance, or internal citation record before operational reliance.
SEC-D1190D2D56Partially verified Chain / Categories / Criteria - 0: Visibly stretched links
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/0/criteria/0- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-79F6A4EE6DVerified Chain / Categories / Criteria - 1: Cracked links
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/0/criteria/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the crack-removal criterion against NSC 10.
SEC-BC9D4FE72DPartially verified Chain / Categories / Criteria - 2: Gouged links
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/0/criteria/2- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-DDCDCC5DB0Verified Chain / Categories / Criteria - 3: Missing or illegible manufacturer WLL/grade markings
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 11(4), PDF page 15.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/0/criteria/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for missing/illegible manufacturer WLL marking as a removal criterion against NSC 10.
SEC-AECB4700F8Partially verified Chain / Categories / Criteria - 4: Worn links or components that are damaged or weakened
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/0/criteria/4- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-01361875A8Partially verified Chain / Categories / Criteria - 5: Twisted or deformed links
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/0/criteria/5- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-5386D6BDA4Partially verified Synthetic Webbing (Straps) / Categories / Criteria - 0: Holes in the webbing
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/0- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-1AB89E9401Verified Synthetic Webbing (Straps) / Categories / Criteria - 1: Tears or cuts
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the cut-removal criterion against NSC 10.
SEC-6D33CE182EPartially verified Synthetic Webbing (Straps) / Categories / Criteria - 2: Broken stitching in load-bearing splices
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/2- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-9A5ECC43A6Verified Synthetic Webbing (Straps) / Categories / Criteria - 3: Knots
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the knot-removal criterion against NSC 10.
SEC-236CD87A9BPartially verified Synthetic Webbing (Straps) / Categories / Criteria - 4: Acid or alkali burns
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/4- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-781FD44ACFPartially verified Synthetic Webbing (Straps) / Categories / Criteria - 5: Melting or charring
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/5- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-C903F21513Partially verified Synthetic Webbing (Straps) / Categories / Criteria - 6: Weld spatter damage
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/6- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-9D8241DF00Partially verified Synthetic Webbing (Straps) / Categories / Criteria - 7: Excessive UV degradation (faded, brittle)
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/7- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-B6897127B1Partially verified Synthetic Webbing (Straps) / Categories / Criteria - 8: Crushed fibers
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/8- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-BDC318DDD4Verified Synthetic Webbing (Straps) / Categories / Criteria - 9: Illegible or missing WLL tag
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 11(4), PDF page 15.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/1/criteria/9- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for missing/illegible WLL marking as a removal criterion against NSC 10.
SEC-413D772450Verified Binders (Lever or Ratchet) / Categories / Criteria - 0: Cracked components
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/criteria/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the crack-removal criterion against NSC 10.
SEC-4131AB26A0Partially verified Binders (Lever or Ratchet) / Categories / Criteria - 1: Deformed components
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/criteria/1- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-1E25F17E3AVerified Binders (Lever or Ratchet) / Categories / Criteria - 2: Missing or illegible manufacturer WLL marking
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 11(4), PDF page 15.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/criteria/2- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for missing/illegible manufacturer WLL marking as a removal criterion against NSC 10.
SEC-BDE6CD4E4EVerified Binders (Lever or Ratchet) / Categories / Criteria - 3: Malfunctioning ratchet or lever mechanism
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/criteria/3- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the malfunctioning-component criterion against NSC 10.
SEC-28EC1EC727Partially verified Binders (Lever or Ratchet) / Categories / Criteria - 4: Bent or damaged handle
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 8(2), PDF page 14.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/criteria/4- Risk
- High risk, Medium confidence
- Follow-up
- NSC 10 verifies the broad damaged/weakened/proper-working-order principle; map this exact removal threshold or defect phrase to WSTDA, NACM, CVSA, manufacturer, or another official inspection/removal source before marking verified.
SEC-892D34F8B4Verified Binders (Lever or Ratchet) / Categories - 0: Ratchet binders provide more controlled tensioning with less snap-back hazard than lever binders.
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
wa_sharp_lever_vs_ratchet- Lever vs. Ratchet- Locator
- Washington SHARP / KeepTruckingSafe Lever vs. Ratchet tip sheet, Publication No. 90-99-2012; ratchet binders reduce bodily strain and release more gradually than lever binders.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/notes/0- Risk
- Medium risk, High confidence
- Follow-up
- Keep this labelled as safety/ergonomics guidance, not an NSC 10 legal requirement.
SEC-F50CF42134Verified Binders (Lever or Ratchet) / Categories - 1: Binder, connector, anchor point, and attachment WLL must be considered; the tiedown assembly is limited by the lowest WLL component.
- Surface
- REF > Securement > Removal Criteria
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 21(1), PDF page 16.
- App data
apps/transport-ref/src/data/securement/removal-criteria.json/categories/2/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this tiedown-assembly WLL limitation claim against NSC 10.
SEC-8E6C84C0B7Partially verified Design Factor - Design Factor: 3:1 (WLL = one-third of breaking strength)
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
wstda_t1_2005_ibr- WSTDA T-1: Recommended Standard Specification for Synthetic Web Tie Downs- Locator
- WSTDA T-1 incorporated-by-reference archive, table of contents identifies Design Factor section; exact 3:1 clause requires manual/current-standard extraction.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/designFactor- Risk
- High risk, Medium confidence
- Follow-up
- Extract the exact current WSTDA T-1 design-factor clause or replace this with manufacturer-tag WLL guidance only.
SEC-8109FCE21EVerified 0: Marked straps use manufacturer-specified WLL.
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 11(1) and section 21(2), PDF pages 15 and 17.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/notes/0- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this marked-strap/no-unmarked-default caution against NSC 10.
SEC-58FB3BDF72Verified 1: Unmarked, missing-tag, or illegible straps must not use these example values.
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 11(1) and section 21(2), PDF pages 15 and 17.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/notes/1- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this marked-strap/no-unmarked-default caution against NSC 10.
SEC-5BE5DF0CCDVerified 2: The 2/3/4 inch rows are operational examples pending manufacturer or WSTDA source verification, not current NSC 10 default values.
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing rows for 2, 3, and 4 inch webbing; Canadian use still requires marked strap/manufacturer WLL and NSC 10 treatment.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/notes/2- Risk
- High risk, High confidence
- Follow-up
- Keep the caveat: these are cross-border table examples, not a substitute for marked manufacturer WLL in Canadian operations.
SEC-3321B14047Partially verified 2" Webbing / Straps / Basis - Basis: example_marked_rating_pending_source
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- App metadata clarifying that strap rows are marked-rating examples, not current NSC 10 default values.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/0/basis- Risk
- High risk, Medium confidence
- Follow-up
- Keep this caveat with the example strap WLL rows until manufacturer/WSTDA sources are mapped.
SEC-69A5E7F035Partially verified 2" Webbing / Straps / Label - Label: 2" Webbing
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/0/label- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-4FA3A95344Partially verified 2" Webbing / Straps / Width In - Width In: 2
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/0/width_in- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-61445DD1F2Partially verified 2" Webbing / Straps / Width Mm - Width Mm: 51
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/0/width_mm- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-F6F17223B9Partially verified 2" Webbing / Straps / Wll Kg - Wll Kg: 907
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing row 50 mm (2 in): WLL 910 kg (2,000 lb). Used here as a cross-border source target; Canadian NSC 10/marked manufacturer WLL remains primary for Canadian operations.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/0/wll_kg- Risk
- Medium risk, Medium confidence
- Follow-up
- Confirm whether the app should display kg as a rounded conversion from pounds or use the rounded kg value in the source table; label conversions clearly.
SEC-AEEDE259E1Verified 2" Webbing / Straps / Wll Lbs - Wll Lbs: 2000
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing row 50 mm (2 in): WLL 910 kg (2,000 lb). Used here as a cross-border source target; Canadian NSC 10/marked manufacturer WLL remains primary for Canadian operations.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/0/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the pounds value against the cited 49 CFR synthetic-webbing table, but keep Canadian caveats and manufacturer-tag priority visible.
SEC-7E843F2FE9Partially verified 3" Webbing / Straps / Basis - Basis: example_marked_rating_pending_source
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- App metadata clarifying that strap rows are marked-rating examples, not current NSC 10 default values.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/1/basis- Risk
- High risk, Medium confidence
- Follow-up
- Keep this caveat with the example strap WLL rows until manufacturer/WSTDA sources are mapped.
SEC-D8DB7B852CPartially verified 3" Webbing / Straps / Label - Label: 3" Webbing
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/1/label- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-BE3C41B983Partially verified 3" Webbing / Straps / Width In - Width In: 3
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/1/width_in- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-308A9120DBPartially verified 3" Webbing / Straps / Width Mm - Width Mm: 76
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/1/width_mm- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-1473348583Partially verified 3" Webbing / Straps / Wll Kg - Wll Kg: 1361
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing row 75 mm (3 in): WLL 1,360 kg (3,000 lb). Used here as a cross-border source target; Canadian NSC 10/marked manufacturer WLL remains primary for Canadian operations.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/1/wll_kg- Risk
- Medium risk, Medium confidence
- Follow-up
- Confirm whether the app should display kg as a rounded conversion from pounds or use the rounded kg value in the source table; label conversions clearly.
SEC-5C63B567B6Verified 3" Webbing / Straps / Wll Lbs - Wll Lbs: 3000
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing row 75 mm (3 in): WLL 1,360 kg (3,000 lb). Used here as a cross-border source target; Canadian NSC 10/marked manufacturer WLL remains primary for Canadian operations.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/1/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the pounds value against the cited 49 CFR synthetic-webbing table, but keep Canadian caveats and manufacturer-tag priority visible.
SEC-52BA83E734Partially verified 4" Webbing / Straps / Basis - Basis: example_marked_rating_pending_source
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- App metadata clarifying that strap rows are marked-rating examples, not current NSC 10 default values.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/2/basis- Risk
- High risk, Medium confidence
- Follow-up
- Keep this caveat with the example strap WLL rows until manufacturer/WSTDA sources are mapped.
SEC-409A383041Partially verified 4" Webbing / Straps / Label - Label: 4" Webbing
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/2/label- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-4E997A4CACPartially verified 4" Webbing / Straps / Width In - Width In: 4
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/2/width_in- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-9C7AA37A9CPartially verified 4" Webbing / Straps / Width Mm - Width Mm: 102
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- Synthetic webbing type/width label is app reference metadata; exact manufacturer/WSTDA source required for legal WLL value.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/2/width_mm- Risk
- High risk, Medium confidence
- Follow-up
- Keep this as descriptive UI metadata unless a manufacturer/WSTDA source is mapped for the corresponding WLL values.
SEC-428FE75527Partially verified 4" Webbing / Straps / Wll Kg - Wll Kg: 1814
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing row 100 mm (4 in): WLL 1,810 kg (4,000 lb). Used here as a cross-border source target; Canadian NSC 10/marked manufacturer WLL remains primary for Canadian operations.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/2/wll_kg- Risk
- Medium risk, Medium confidence
- Follow-up
- Confirm whether the app should display kg as a rounded conversion from pounds or use the rounded kg value in the source table; label conversions clearly.
SEC-82B8C9154DVerified 4" Webbing / Straps / Wll Lbs - Wll Lbs: 4000
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ecfr_49_393_subpart_i- 49 CFR Part 393 Subpart I - Protection Against Shifting and Falling Cargo- Locator
- 49 CFR 393.108, Tables to section 393.108, Synthetic Webbing row 100 mm (4 in): WLL 1,810 kg (4,000 lb). Used here as a cross-border source target; Canadian NSC 10/marked manufacturer WLL remains primary for Canadian operations.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/straps/2/wll_lbs- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for the pounds value against the cited 49 CFR synthetic-webbing table, but keep Canadian caveats and manufacturer-tag priority visible.
SEC-BDACADD101Partially verified Table Label - Table Label: Marked strap WLL examples
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- App metadata clarifying that strap rows are marked-rating examples, not current NSC 10 default values.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/tableLabel- Risk
- High risk, Medium confidence
- Follow-up
- Keep this caveat with the example strap WLL rows until manufacturer/WSTDA sources are mapped.
SEC-CE6B6CFAA0Verified Warning - Warning: Use the WLL printed on the strap tag or manufacturer documentation. Do not use these examples for unmarked, missing-tag, or illegible straps.
- Surface
- REF > Securement > Strap WLL
- Jurisdiction
- multi
- Source
ccmta_nsc10_pdf- National Safety Code Standard 10 - Cargo Securement- Locator
- NSC Standard 10, Part 1, Division 3, section 11(1) and section 21(2), PDF pages 15 and 17.
- App data
apps/transport-ref/src/data/securement/strap-wll.json/warning- Risk
- High risk, High confidence
- Follow-up
- No immediate correction required for this marked-strap/no-unmarked-default caution against NSC 10.